RADIO ANTENNA CORD REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE ROOF HEADLINING ASSEMBLY (for 5 Door)


    1. Remove the roof headlining assembly Click here.

  3. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for 5 Door)


    1. w/o Sliding Roof:


      1. for Diversity:

        Including the notch in the part of the illustration labeled A, detach the antenna cord from the 6 clamps and the 2 notches on the rear of the roof headlining.

      2. for Non Diversity:

        Not including the notch in the part of the illustration labeled A, detach the antenna cord from the 6 clamps and the notch on the rear of the roof headlining.

        A00XGZ8E01
      3. Remove the antenna cord from the roof headlining.

      4. Remove the double-sided tape from the roof headlining.

    2. w/ Sliding Roof:


      1. for Diversity:

        Including the notch in the part of the illustration labeled A, detach the antenna cord from the 11 clamps and the 2 notches on the rear of the roof headlining.

      2. for Non Diversity:

        Not including the notch in the part of the illustration labeled A, detach the antenna cord from the 11 clamps and the notch on the rear of the roof headlining.

        A00XI9HE01
      3. Remove the antenna cord from the roof headlining.

      4. Remove the double-sided tape from the roof headlining.

  4. REMOVE ROOF HEADLINING ASSEMBLY (for 3 Door)


    1. Remove the roof headlining assembly Click here.

  5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for 3 Door)


    1. w/o Sliding Roof:


      1. for Diversity:

        Including the clamps and notch in the part of the illustration labeled A, detach the antenna cord from the 6 clamps and the 2 notches on the rear of the roof headlining.

      2. for Non Diversity:

        Not including the clamps and notch in the part of the illustration labeled A, detach the antenna cord from the clamp and the notch on the rear of the roof headlining.

        A00XJQEE01
      3. Remove the antenna cord from the roof headlining.

      4. Remove the double-sided tape from the roof headlining.

    2. w/ Sliding Roof:


      1. for Diversity:

        Including the clamps and notch in the part of the illustration labeled A, detach the antenna cord from the 9 clamps and the 2 notches on the rear of the roof headlining.

      2. for Non Diversity:

        Not including the clamps and notch in the part of the illustration labeled A, detach the antenna cord from the 4 clamps and the notch on the rear of the roof headlining.

        A00XES2E01
      3. Remove the antenna cord from the roof headlining.

      4. Remove the double-sided tape from the roof headlining.