PILLAR SPEAKER INSPECTION


  1. INSPECT FRONT NO. 3 SPEAKER ASSEMBLY


    1. for JBL Made:


      1. A0099IAE19
        Text in Illustration
        *a

        Component without harness connected

        (Front No. 3 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (TWL+) - 3 (+) Always Below 1 Ω
        2 (TWL-) - 4 (-) Always Below 1 Ω
        1 (TWL+) - 2 (TWL-) Always 3.4 Ω

        If the result is not as specified, replace the front No. 3 speaker assembly.

    2. except JBL Made:


      1. Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one.

        OK
        Malfunction disappears.