REAR DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 14 Speakers)


    1. A00JX4EE01

      Align the speaker with the door position pins labeled A.

    2. Install the rear No. 2 speaker with the 2 screws.

      Note

      Do not touch the cone of the speaker.

  2. INSTALL REAR SPEAKER SET


    1. A00JZU7E01

      Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

    2. Install the rear speaker set with the 3 screws in the order shown in the illustration.

      Note

      Do not touch the cone of the speaker.

    3. Connect the connector.

  3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH


    1. A00O6BR

      Attach the 3 claws to install the rear door inner glass weatherstrip as shown in the illustration.

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. A00O32D

      Install the clamp to the door panel.

    2. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. Connect each connector.

    4. A00O5NC

      Attach the rear door trim board sub-assembly by attaching the 4 claws of the rear door inner glass weatherstrip as shown in the illustration.

    5. Attach the 9 clips and install the rear door trim board sub-assembly.

    6. Install the 3 screws.

  5. INSTALL ASSIST GRIP COVER LH


    1. A00OBDH

      Attach the 8 claws to install the assist grip cover.

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A00O3XZ

      Attach the 3 claws to install the door inside handle bezel.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.