REAR DOOR SPEAKER INSPECTION


  1. INSPECT REAR SPEAKER SET


    1. for JBL Made:


      1. A009ATFE39
        Text in Illustration
        *a

        Component without harness connected

        (Rear Speaker Set)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 1.8 to 2.6 Ω

        If the result is not as specified, replace the rear speaker set.

    2. except JBL Made:


      1. A009ATFE39
        Text in Illustration
        *a

        Component without harness connected

        (Rear Speaker Set)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4 Ω

        If the result is not as specified, replace the rear speaker set.

  2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY


    1. for JBL Made:


      1. A0099IAE21
        Text in Illustration
        *a

        Component without harness connected

        (Rear No. 2 Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (+TW) - 3 (+) Always Below 1 Ω
        2 (-TW) - 4 (-) Always Below 1 Ω
        1 (+TW) - 2 (-TW) Always 3.4 Ω

        If the result is not as specified, replace the rear No. 2 speaker assembly.

    2. except JBL Made:


      1. Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one.

        OK
        Malfunction disappears.