FRONT DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

    2. A00JY5BE01

      Install the speaker with the 4 screws in the order shown in the illustration.

    3. Connect the speaker connector.

      Note

      Do not touch the cone of the speaker.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH


    1. A00O9AZ

      Install the front door inner glass weatherstrip.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A00O9T6

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    2. Connect 2 connectors.

    3. w/ Seat Position Memory System:


      1. Connect the connectors.

    4. A00OB1V

      Attach the front door trim board sub-assembly by attaching the 4 claws of the front door inner glass weatherstrip as shown in the illustration.

    5. A00O4LI

      Attach the 12 clips and front door trim board retainer to install the front door trim board sub-assembly.

    6. Install the 3 screws.

  4. INSTALL ASSIST GRIP COVER LH


    1. A00O6EG

      Attach the 8 claws to install the assist grip cover.

  5. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A00OB5L

      Attach the 3 claws to install the inside handle bezel.

  6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    1. Attach the 2 claws to install the front door lower frame bracket garnish.

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.