LUGGAGE SPEAKER (for 3 Door) INSPECTION


  1. INSPECT REAR HEADER SPEAKER ASSEMBLY


    1. for JBL Made:


      1. A0094R3E16
        Text in Illustration
        *a

        Component without harness connected

        (Rear Header Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 1.6 to 2.2 Ω

        If the result is not as specified, replace the rear header speaker assembly.

    2. for Pioneer Made:


      1. A0094R3E16
        Text in Illustration
        *a

        Component without harness connected

        (Rear Header Speaker Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4 Ω

        If the result is not as specified, replace the rear header speaker assembly.

  2. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX


    1. A0095XNE52
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Speaker Assembly with Box)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (WF1+) - 2 (WF1-) Always 4 Ω
      3 (WF2+) - 4 (WF2-) Always 4 Ω

      If the result is not as specified, replace the No. 1 speaker assembly with box.