LUGGAGE SPEAKER (for 5 Door) INSPECTION

INSPECT REAR HEADER SPEAKER ASSEMBLY

1. 

   Text in Illustration

   *a	Component without harness connected (Rear Header Speaker Assembly)

   for JBL Made:

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always 1.6 to 2.2 Ω

      If the result is not as specified, replace the rear header speaker assembly.

2. 

   Text in Illustration

   *a	Component without harness connected (Rear Header Speaker Assembly)

   for Pioneer Made:

   
   

   1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 - 2 Always 4 Ω

      If the result is not as specified, replace the rear header speaker assembly.

INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX

1. for Pioneer Made:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (No. 1 Speaker Assembly with Box)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 (WF1+) - 2 (WF1-) Always 3 Ω 3 (WF2+) - 4 (WF2-) Always 3 Ω

      If the result is not as specified, replace the No. 1 speaker assembly with box.

2. for JBL Made:

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (No. 1 Speaker Assembly with Box)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 1 (WF1+) - 2 (WF1-) Always 1.6 to 2.4 Ω 3 (WF2+) - 4 (WF2-) Always 1.6 to 2.4 Ω

      If the result is not as specified, replace the No. 1 speaker assembly with box.