RADIO RECEIVER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    A00940P

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for Lower Side)

    A00O9Z2

    1. Detach the 4 clips and remove the instrument panel finish panel end.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for Lower Side)

    A00OAX0

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel finish panel end.

  5. REMOVE FRONT UPPER CONSOLE PANEL GARNISH (for Lower Side)

    A00O85FE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front console upper panel garnish.

    2. Detach the 5 clips.

    3. Disconnect each connector and remove the front console upper panel garnish.

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Lower Side)


    1. A00JV8W

      Remove the 4 bolts.

    2. A00JZKC

      Pull the radio receiver to detach the 3 clips on the backside of the radio receiver.

    3. Disconnect the connectors and remove the radio receiver.

  7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Upper Side)

    A00O8AW

    1. Detach the 10 clips.

    2. Disconnect the connector and remove the center instrument cluster finish panel.

  8. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Upper Side)


    1. A00JV18

      Remove the 4 bolts.

    2. Disconnect the connectors and remove the radio receiver.

  9. REMOVE NO. 1 RADIO BRACKET (for Upper Side)


    1. A00JTPY

      Remove the 4 screws and bracket.

  10. REMOVE NO. 1 RADIO BRACKET (for Lower Side)


    1. A00K1XL

      Remove the 3 screws and bracket.

  11. REMOVE NO. 2 RADIO BRACKET (for Upper Side)


    1. A00JW2V

      Remove the 4 screws and bracket.

  12. REMOVE NO. 2 RADIO BRACKET (for Lower Side)


    1. A00JZAF

      Remove the 3 screws and bracket.