AUDIO AND VISUAL SYSTEM (w/o Navigation System) Cellular Phone cannot Send/Receive

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK "BLUETOOTH" SETTINGS


    1. Check if the "Bluetooth" settings are correct.

      OK
      "Bluetooth" settings are correct.

    NG

    SET SETTINGS CORRECTLY

    OK

  2. CHECK CELLULAR PHONE


    1. Check if the cellular phone is "Bluetooth" compatible.

      Tech Tips

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK
      The phone is "Bluetooth" compatible.

    NG

    END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

    OK

  3. CHECK SETTINGS

    Tech Tips

    The cellular phone is unable to call under any of the following conditions.


    • The cellular phone is locked.

    • The directory is being transferred.

    • There is a network error.

    • Transmission is regulated.

    • The power is off.

    • The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).


    1. Check that the cellular phone settings are set correctly.

      OK
      The cellular phone settings are set correctly.

    NG

    SET SETTINGS CORRECTLY

    OK

  4. CHECK CELLULAR PHONE


    1. Check if the cellular phone can make a call.

      OK
      The cellular phone can make a call.

    NG

    CELLULAR PHONE IS FAULTY

    OK

  5. CHECK RECEPTION


    1. Set the cellular phone so that it can receive calls.

    2. Place the cellular phone close to the radio receiver assembly.

    3. Check the radio receiver assembly to confirm that a "Bluetooth" connection exists between the radio receiver assembly and phone.

      OK
      The cellular phone has reception.
      Result
      Result Proceed to
      OK A
      NG (w/o Accessory Meter) B
      NG (w/ Accessory Meter) C

    B

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    C

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here