AUDIO AND VISUAL SYSTEM (w/o Navigation System) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK IF A PROPER CD IS INSERTED


    1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.

      OK
      Normal CD.

      Tech Tips


      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.


    NG

    CHANGE CD

    OK

  2. CHECK THAT CD IS INSERTED PROPERLY


    1. Check whether or not the CD is inserted upside down.

      OK
      The CD is properly inserted.

    NG

    INSERT CD PROPERLY

    OK

  3. CHECK CD


    1. A0097F8

      Clean the CD by wiping it with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note

      Do not use a conventional record cleaner or antistatic preservative.


    NG

    REPLACE CD WITH ANOTHER AND RECHECK Click here

    OK

    END

  4. REPLACE CD WITH ANOTHER AND RECHECK


    1. Replace the CD with a normal one and check that the malfunction disappears.

      OK
      The malfunction disappears.
      Result
      Result Proceed to
      OK A
      NG (w/o Accessory Meter) B
      NG (w/ Accessory Meter) C

    B

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    C

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    A

    END