AUDIO AND VISUAL SYSTEM (w/o Navigation System), Diagnostic DTC:62-78, 63-78

DTC Code DTC Name
62-78 DSP Error
63-78 DSP Error

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
62-78 An error occurs during the decode process (MP3/WMA). Radio receiver assembly
63-78 An error occurs during the decode process (MP3/WMA).

INSPECTION PROCEDURE

Tech Tips

After the inspection is completed, clear the DTCs.

Note


  • These codes may be output even if there is no malfunction.

  • If these codes are output frequently, replace the radio receiver assembly.


PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs and check if the same trouble occurs again.

      OK
      Malfunction disappears.
      Result
      Result Proceed to
      OK A
      NG (w/o Accessory Meter) B
      NG (w/ Accessory Meter) C

    B

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    C

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    A

    END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)