VANE PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE SUCTION PORT UNION


    1. A009B4I

      Remove the bolt and power steering suction port union.

    2. Using a screwdriver, remove the O-ring from the power steering suction port union.

  2. REMOVE FLOW CONTROL VALVE


    1. A0097J9

      Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and compression spring.

  3. REMOVE VANE PUMP REAR HOUSING


    1. A0094TS

      Remove the 4 bolts and vane pump rear housing.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the vane pump rear housing.

  4. REMOVE VANE PUMP REAR SIDE PLATE


    1. Remove the wave washer from the vane pump rear side plate.

    2. A009BS0

      Remove the vane pump rear side plate.

  5. REMOVE VANE PUMP CAM RING


    1. A0099HJ

      Remove the vane pump cam ring.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

    2. A0097LR

      Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT


    1. Remove the vane pump shaft from the vane pump front housing.

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A00967WE02
      Text in Illustration
      *1 Cloth

      Using a screwdriver, pry out the vane pump housing oil seal.

      Note

      Be careful not to damage the vane pump front housing.