VANE PUMP (for 1GR-FE) DISASSEMBLY


  1. SECURE VANE PUMP ASSEMBLY


    1. A00JWJWE01

      Using SST, secure the vane pump in a vise.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE SUCTION PORT UNION


    1. A00K04J

      Remove the bolt and suction port union from the vane pump.

    2. Using a screwdriver, remove the O-ring from the suction port union.

  3. REMOVE VANE PUMP REAR HOUSING


    1. A00JXIR

      Remove the 4 bolts and vane pump rear housing from the vane pump front housing.

    2. A00JTQ8E03

      Using a screwdriver, remove the O-ring from the vane pump rear housing.

  4. REMOVE VANE PUMP SHAFT WITH PULLEY


    1. A00K0L5

      Using 2 screwdrivers, remove the snap ring from the vane pump shaft.

    2. Remove the vane pump shaft with pulley.

      Note

      Be careful not to drop or damage the vane pump shaft with vane pump pulley.

      If it is damaged, replace the vane pump assembly.

  5. REMOVE VANE PUMP ROTOR

    A00K0RA

    1. Remove the 10 vane pump plates.

      Note

      Take care not to drop the vane pump plates.

    2. Remove the vane pump rotor from the vane pump front housing.

  6. REMOVE VANE PUMP CAM RING

    A00JXBE

    1. Remove the cam ring from the vane pump front housing.

  7. REMOVE VANE PUMP FRONT SIDE PLATE


    1. A00JZJO

      Remove the front side plate from the vane pump front housing.

    2. A00JUM0E03

      Using a screwdriver, remove the O-ring from the front side plate.

    3. A00JXZI

      Remove the O-ring from the vane pump front housing.

  8. REMOVE VANE PUMP HOUSING OIL SEAL


    1. A00JVP3E03
      Text in Illustration
      *a Cloth

      Using a screwdriver and piece of cloth, pry out the oil seal.

      Note

      Be careful not to damage the vane pump front housing.