REAR BRAKE DISASSEMBLY


  1. REMOVE CYLINDER BOOT


    1. A0095BD

      Using a screwdriver, remove the cylinder boot from the rear disc brake cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR DISC BRAKE PISTON


    1. A009BWL

      Place a cloth or equivalent between the rear disc brake piston and rear disc brake cylinder.

    2. Using compressed air, remove the rear disc brake piston from the rear disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not spatter the brake fluid.

  3. REMOVE PISTON SEAL


    1. A009BW8

      Using a screwdriver, remove the piston seal from the rear disc brake cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the inner cylinder or cylinder groove.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG


    1. Remove the bleeder plug from the rear disc brake cylinder.