VACUUM PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE VACUUM PUMP PULLEY


    1. A0094TA

      Using soft jaws, place the vacuum pump in a vise, and then remove the pulley lock nut and pulley.

  2. REMOVE VACUUM PUMP VACUUM HOSE UNION


    1. A009BF7E01

      Using SST, hold the check valve assembly, and then remove the union bolt, vacuum hose union and 2 gaskets.

      SST
      09922-10010

  3. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. A0099R3

      Remove the check valve assembly and gasket.

  4. REMOVE VACUUM PUMP END COVER


    1. A009C2M

      Remove the 4 screws and end cover.

  5. REMOVE VACUUM PUMP SHAFT


    1. A0097BZ

      Using a plastic-faced hammer, tap out the vacuum pump shaft together with the bearing.

  6. REMOVE STOP RING


    1. Remove the stop ring from the vacuum pump shaft.

  7. REMOVE VACUUM PUMP BEARING


    1. A0094WC

      Using a press, press out the bearing from the rotor shaft.

  8. REMOVE VACUUM PUMP BLADE


    1. A0096LB

      Remove the 2 screws and end plate.

    2. A0096BVE01

      Remove the rotor and 5 pump blades.

  9. REMOVE O-RING


    1. Remove the O-ring from the case.

  10. REMOVE OIL SEAL


    1. A00972O

      Using a screwdriver, remove the oil seal.