CRAWL SWITCH REMOVAL


  1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A00OBDVE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  2. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A00O9Z2

    1. Detach the 4 clips and remove the instrument panel finish panel end.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A00OAX0

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel finish panel end.

  5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

    A00O85FE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front console upper panel garnish.

    2. Detach the 5 clips.

    3. Disconnect each connector and remove the front console upper panel garnish.

  6. REMOVE CRAWL CONTROL SWITCH ASSEMBLY


    1. Disconnect the connector.

    2. A00K0V2E01
      Text in Illustration
      *A for LHD
      *B for RHD

      Detach the 4 claws and remove the crawl control switch from the front console upper panel garnish.

      Tech Tips

      Tape the screwdriver tip before use.