SKID CONTROL BUZZER INSTALLATION


  1. INSTALL SKID CONTROL BUZZER ASSEMBLY


    1. Connect the connector.

      Note

      Securely connect the connector.

    2. Attach the clamp to install the buzzer.

      Note


      • Securely insert the clamp into the dash panel.

      • If the buzzer is dropped, replace it.

  2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.