FRONT SPEED SENSOR REMOVAL

Tech Tips


  • The procedure listed below is for the LH side.

  • Other than areas where instructions are provided, use the same procedures for the RH and LH sides.


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT SKID CONTROL SENSOR WIRE


    1. A00JXF6

      Disconnect the connector from the front speed sensor.

    2. Remove the 2 bolts and 2 harness clamps.

    3. Detach the clip.

    4. A00JZ26

      Remove the 2 bolts and 2 harness clamps.

    5. Disconnect the connector as follows.

      A00K1FHE01
      Text in Illustration
      *A for LH *B for RH

      1. for LH:


        1. Disconnect the connector.

        2. Detach the connector.

      2. for RH:


        1. Disconnect the connector.

        2. Detach the connector from the skid control sensor clamp.

        3. Detach the clip.

        4. Remove the bolt and skid control sensor clamp.

  3. REMOVE SKID CONTROL SENSOR CLAMP


    1. A00JY9JE01
      Text in Illustration
      *A for LH
      *B for RH

      Remove the bolt and skid control sensor clamp from the knuckle.

  4. REMOVE FRONT SPEED SENSOR


    1. Remove the bolt and speed sensor from the knuckle.

      Note

      Pull out the sensor while trying as much as possible not to rotate it.