YAW RATE AND ACCELERATION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY


    1. for Automatic Transmission:

      Click here

    2. for Manual Transmission:

      Click here

    3. w/ Refrigerated Cool Box:

      Click here

    4. for Bench Seat Type:

      Click here

  3. REMOVE FRONT SEAT ASSEMBLY (for Bench Seat Type)

    Click here

  4. REMOVE CENTER FLOOR CARPET ASSEMBLY (for Bench Seat Type)


    1. A00O8H4

      Remove the 4 bolts and center floor carpet assembly.

  5. REMOVE YAW RATE AND ACCELERATION SENSOR


    1. Remove the 2 bolts and yaw rate and acceleration sensor.

      A00OA1EE01
      Text in Illustration
      *A for Automatic Transmission *B for Manual Transmission

    2. Disconnect the connector.

    3. for Automatic Transmission:

      Detach the clamp from the sensor bracket.