FRONT STABILIZER BAR (w/o KDSS) INSTALLATION


  1. INSTALL FRONT STABILIZER BAR

  2. INSTALL FRONT NO. 1 STABILIZER BAR BUSH


    1. A0095E3E05
      Text in Illustration
      *1 Bushing Stopper
      *a Outer Side
      *b Front Side
      A009BSG Protrusion

      Install the 2 front No. 1 stabilizer bar bushes.

      Tech Tips


      • Install the bush to the inner side of the bushing stopper on the stabilizer bar.


      • Install the No. 1 stabilizer bush with the protrusion facing inward.

  3. INSTALL FRONT NO. 1 STABILIZER BRACKET LH


    1. Install the front No. 1 stabilizer bracket LH with the 2 bolts.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }

  4. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. Install the front stabilizer link assembly LH with the 2 nuts.

      Torque:
      70 N*m  { 714 kgf*cm, 52 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY


    1. Install the 2 member braces with the 6 bolts.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

  8. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A00XIZZ

      Hook the engine under cover to the vehicle body as shown in the illustration.

    2. Install the 4 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  9. INSTALL LOWER FRONT BUMPER COVER


    1. Install the front bumper cover lower with the 5 bolts and clip.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  10. INSTALL FRONT WHEEL

    Torque:
    112 N*m  { 1142 kgf*cm, 83 ft.*lbf }