FRONT UPPER SUSPENSION ARM INSPECTION


  1. INSPECT FRONT SUSPENSION UPPER ARM ASSEMBLY LH


    1. A00957E

      As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.

    2. Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take a torque reading on the fifth turn.

      Standard turning torque
      0.98 to 4.41 N*m (1.0 to 45 kgf*cm, 9 to 39 in.*lbf)