HEIGHT CONTROL SWITCH INSPECTION


  1. INSPECT HEIGHT CONTROL SWITCH


    1. A0099T4E01
      Text in Illustration
      *a

      Component without harness connected

      (Height Control Switch)

      Measure the resistance according to the values in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (LO) - 4 (E) "Down" pressed Below 1 Ω
      "Up" pressed 10 kΩ or higher
      3 (HI) - 4 (E) "Down" pressed 10 kΩ or higher
      "Up" pressed Below 1 Ω

      If the result is not as specified, replace the height control switch.