ABSORBER CONTROL SWITCH INSTALLATION


  1. INSTALL ABSORBER CONTROL SWITCH


    1. A0098GQE01
      Text in Illustration
      *A for LHD
      *B for RHD

      Attach the 2 claws to install the absorber control switch.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Connect each connector.

    2. Attach the 4 clips to install the instrument panel finish panel.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.