ABSORBER CONTROL SWITCH INSPECTION


  1. INSPECT ABSORBER CONTROL SWITCH


    1. A009506E01
      Text in Illustration
      *a

      Component without harness connected

      (Absorber Control Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (GND) - 4 (ECU2) COMFORT position Below 1 Ω
      Normal position 10 kΩ or higher
      3 (GND) - 2 (ECU1) SPORT position Below 1 Ω
      Normal position 10 kΩ or higher

      If the result is not as specified, replace the absorber control switch.