REAR ACCELERATION SENSOR INSTALLATION


  1. INSTALL REAR ACCELERATION SENSOR


    1. A00JZZB

      Install the rear acceleration sensor with the bolt as shown in the illustration.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      Replace the rear acceleration sensor with a new one if it is dropped.

    2. Connect the connector.

      Note

      Securely connect the connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. for 3 Door:

      Click here

    2. for 5 Door:

      Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.