REAR ACCELERATION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. for 3 Door:

      Click here

    2. for 5 Door:

      Click here

  3. REMOVE REAR ACCELERATION SENSOR


    1. A00JZZB

      Disconnect the connector.

    2. Remove the bolt and rear acceleration sensor.

      Note

      Replace the rear acceleration sensor with a new one if it is dropped.