DESCRIPTION
The stabilizer control ECU receives forward, backward and lateral acceleration information from the yaw rate and acceleration sensor via CAN communication.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1887/87 | The stabilizer control ECU receives an error signal from the yaw rate and acceleration sensor for 1 second. |
|
INSPECTION PROCEDURE
Tech Tips
If DTC U0124/71 and C1887/87 are output at the same time, perform the inspection necessary for the CAN communication system first Click here.
PROCEDURE
CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)
Check for yaw rate and acceleration sensor malfunction DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here |
| A |
|
CHECK DTC
Clear the DTCs Click here.
Perform a road test.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
| B |
|
REPLACE STABILIZER CONTROL ECU Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here