FRONT ACCELERATION SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

    Click here

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)

    Click here

  4. REMOVE FRONT ACCELERATION SENSOR


    1. A00JV5Z

      Disconnect the connector from the front acceleration sensor.

    2. Remove the bolt and acceleration sensor.

      Note

      Replace the front acceleration sensor with a new one if it is dropped.