KINETIC DYNAMIC SUSPENSION SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

*: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    NEXT

  3. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Using the intelligent tester, inspect the CAN communication function to make sure there are no malfunctions in the communication system (for LHD: Click here, for RHD: Click here).

      Result
      Result Proceed to
      CAN DTC is not output A
      CAN DTC is output B

      B

      GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
      A

  5. CHECK AND CLEAR DTC*


    1. Check for DTCs Click here.


      NEXT

  6. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom Occurs B

    B

    Go to step 9
    NEXT

  7. SYMPTOM SIMULATION


    NEXT

  8. CHECK DTC*


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC not output A
      DTC output B

      B

      Go to step 10
      A

  9. PROBLEM SYMPTOMS TABLE


    1. Refer to the Problem Symptoms Table Click here.


      NEXT
      Go to step 12

  10. DTC CHART


    1. Refer to the Diagnostic Trouble Code Chart Click here.


      NEXT

  11. CIRCUIT INSPECTION


    NEXT

  12. IDENTIFICATION OF PROBLEM


    NEXT

  13. REPAIR OR REPLACE


    NEXT

  14. CONFIRMATION TEST


    NEXT
    END