REAR AXLE SHAFT REASSEMBLY

Note

Do not allow foreign matter, etc. to contact the rear axle hub and bearing assembly.


  1. INSTALL BRAKE DRUM OIL DEFLECTOR LH

    A009BWRE02

    1. Install a new deflector gasket and deflector to the rear axle shaft.

      Tech Tips

      Align the 2 oil drain holes.

      Text in Illustration
      *1 Oil Drain Holes

    2. Insert 6 new hub bolts.

    3. A009AVL

      Temporarily install a washer and nut to each hub bolt as shown in the illustration.

    4. Install the hub bolts by tightening each nut.

    5. Remove the washer and nut from each hub bolt.

  2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH


    1. Install a new rear axle hub and bearing to the parking brake plate.

      Note

      Make sure the bearing is securely installed to the parking brake plate.

    2. A009BBEE01

      Using 2 socket wrenches and a press, press in the 4 housing bolts.

  3. INSTALL REAR AXLE SHAFT LH

    A009BVPE02
    Text in Illustration
    *a Tapered Surface
    *b Chamfered Surface

    1. Install a new washer and a new retainer to the axle hub as shown in the illustration.

      Note


      • Install the washer with its tapered surface facing downward.

      • Install the retainer with its chamfered surface facing downward.

    2. Using SST and a press, press in the rear axle shaft.

      SST
      09631-12090
      09726-40010
      09951-01100

      Note

      Make sure the bearing is securely installed to the rear axle shaft.

  4. INSTALL REAR AXLE SHAFT SNAP RING LH

    A00954ME01

    1. Using snap ring expander, install a new rear axle shaft snap ring.