TRANSFER ASSEMBLY INSTALLATION


  1. INSTALL TRANSFER ASSEMBLY


    1. for 1KD-FTV:

      Install the transfer assembly with the 8 bolts and 2 brackets.

      Torque:
      24 N*m  { 245 kgf*cm, 18 ft.*lbf }

      Note

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

    2. except 1KD-FTV:

      Install the transfer assembly with the 8 bolts and bracket.

      Torque:
      24 N*m  { 245 kgf*cm, 18 ft.*lbf }

      Note

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER


    1. for A343F:


      1. Install the automatic transmission with transfer Click here.

    2. for 1GR-FE, A750F:


      1. Install the automatic transmission with transfer Click here.

    3. for 1KD-FTV, A750F:


      1. Install the automatic transmission with transfer Click here.

  3. INSTALL MANUAL TRANSMISSION WITH TRANSFER


    1. for G52F:


      1. Install the manual transmission with transfer Click here.

    2. for R150F:


      1. Install the manual transmission with transfer Click here.

    3. for 1GR-FE, RA61F:


      1. Install the manual transmission with transfer Click here.

    4. for 1KD-FTV, RA61F:


      1. Install the manual transmission with transfer Click here.

  4. ADD TRANSFER OIL


    1. Remove the filler plug and gasket.

    2. Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

      Note


      • Add oil slowly.

      • Add oil a little at a time, waiting several minutes between each addition of oil.

    3. Wait approximately 5 minutes and check that the oil level has not changed.

    4. Install a new gasket to the filler plug and then tighten the plug.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  5. CHECK FOR TRANSFER OIL LEAK