COUNTER GEAR INSPECTION


  1. INSPECT COUNTER GEAR


    1. A0096UGE01

      Using a micrometer, measure the outside diameter of the journal surface.

      Standard outside diameter
      25.984 to 26.000 mm (1.0230 to 1.0236 in.)
      Minimum outside diameter
      25.984 mm (1.0230 in.)

      • If the outside diameter is less than the minimum, replace the counter gear.

  2. INSPECT COUNTER GEAR FRONT BEARING


    1. A009BA5E01

      Check that the front bearing rotates smoothly.


      • If the bearing does not rotate smoothly, replace the bearing.