COUNTER GEAR REASSEMBLY


  1. INSTALL COUNTER GEAR FRONT BEARING


    1. A009B42E03

      Using SST and a press, install the front bearing to the counter gear.

      SST
      09515-10010

      Note

      Install the front bearing so that the snap ring groove of the bearing faces the front side.

  2. INSTALL NO. 2 COUNTER GEAR FRONT BEARING SNAP RING


    1. Select a snap ring that makes the clearance between the counter gear and snap ring to be within the specification.

      Standard clearance
      0.10 mm (0.00394 in.) or less
      Standard Snap Ring
      Mark Thickness
      A 2.05 to 2.10 mm (0.0807 to 0.0827 in.)
      B 2.10 to 2.15 mm (0.0827 to 0.0846 in.)
      C 2.15 to 2.20 mm (0.0846 to 0.0866 in.)
      D 2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      E 2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      F 2.30 to 2.35 mm (0.0906 to 0.0925 in.)
    2. A0094BHE02

      Using a snap ring expander, install the snap ring.