CLUTCH ACCUMULATOR (for LHD) REMOVAL


  1. DRAIN BRAKE FLUID FROM CLUTCH LINE

  2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 1GR-FE)


    1. Remove the front propeller shaft Click here.

  3. REMOVE NO. 1 CLUTCH HOUSING COVER (for 1GR-FE)

    A00959T

    1. Remove the 4 bolts and housing cover.

  4. REMOVE CLUTCH ACCUMULATOR ASSEMBLY


    1. for 1GR-FE:


      1. Remove the clutch release cylinder to accumulator tube Click here.

      2. A009AE5

        Using a union nut wrench, disconnect the clutch release cylinder to flexible tube.

        Tech Tips

        Use a container to catch the fluid.

      3. Remove the nut.

      4. A00968I

        Remove the 3 bolts and clutch accumulator.

    2. except 1GR-FE:


      1. A00978T

        Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

        Tech Tips

        Use a container to catch the fluid.

      2. A0097NI

        Using a union nut wrench, disconnect the accumulator to flexible hose tube.

        Tech Tips

        Use a container to catch the fluid.

      3. A0099UZ

        Remove the 3 nuts and clutch accumulator.