TRANSMISSION CONTROL CABLE REMOVAL


  1. REMOVE REAR CONSOLE BOX ASSEMBLY


    1. Remove the rear console box Click here.

  2. REMOVE REAR CONSOLE BOX ASSEMBLY (w/ Refrigerated Cool Box)


    1. Remove console box Click here.

  3. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A0094KS

      Disconnect the transmission control cable end from the shift lever.

    3. A0097BC

      Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.

    4. A00988P

      Remove the nut and clip, and disconnect the transmission control cable assembly from the automatic transmission.

    5. A0096HM

      Remove the 2 nuts and disconnect the ground cable and transmission control cable support.

    6. A0099NA

      Remove the 2 nuts and detach the 3 claws, and then pull out the transmission control cable.