SHIFT LEVER INSPECTION


  1. INSPECT TRANSMISSION CONTROL SWITCH

    A009AGBE14
    Text in Illustration
    *a

    Component without harness connected

    (Transmission Control Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (IG) - 7 (S) Shift lever in S, "+" or "-" Below 1 Ω
      3 (IG) - 7 (S) Shift lever not in S, "+" or "-" 10 kΩ or higher

      If the result is not as specified, replace the transmission floor shift assembly.