SHIFT LEVER ADJUSTMENT


  1. INSPECT SHIFT LEVER POSITION


    1. When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, make sure that it moves smoothly and correctly into position.

    2. Check that the shift lever does not stop when moving the shift lever from R to P, and check that the shift lever does not stick when moving the shift lever from D to S.

    3. Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D and moves in reverse after moving the shift lever to R.

      If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the transmission floor shift assembly installation condition.

  2. ADJUST SHIFT LEVER POSITION


    1. Remove the rear console box Click here.

    2. w/ Refrigerated Cool Box:

      Remove the console box Click here.

    3. Move the shift lever to N.

    4. A00O94DE01
      Text in Illustration
      *1 Slider
      *2 Lock Piece

      Slide the slider in the direction shown in the illustration and pull out the lock piece.

    5. A00OAN9E04

      Push the lock piece into the adjuster case and lock it.

      Note

      Make sure that the lock piece is completely locked by the slider.

    6. Install the rear console box Click here.

    7. w/ Refrigerated Cool Box:

      Install the console box Click here.