SPEED SENSOR REMOVAL


  1. SUPPORT TRANSMISSION AND TRANSFER ASSEMBLY (w/ DPF)


    1. Support the transmission and transfer with a transmission jack.

      Note

      For safety reasons, install the No. 3 frame crossmember after removing the front exhaust pipe.

  2. REMOVE FRONT SUSPENSION MEMBER BRACKET LH AND RH (w/ DPF)


    1. A00O7CM

      Remove the 8 bolts, front bracket suspension member LH and front bracket suspension member RH.

  3. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY (w/ DPF)


    1. A00OASS

      Remove the 4 bolts of the rear engine mounting insulator.

    2. A00O8M1

      Remove the 4 nuts, 4 bolts and frame crossmember.

  4. DISCONNECT AIR FUEL RATIO SENSOR (w/ DPF)


    1. A00XJ67

      Disconnect the air fuel ratio sensor connector and detach the clamp.

  5. DISCONNECT CENTER EXHAUST PIPE ASSEMBLY (w/ DPF)


    1. A00XC4R

      Remove the 2 bolts and 2 compression springs, and then disconnect the center exhaust pipe.

  6. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ DPF)


    1. A00KTCU

      Disconnect the exhaust gas temperature sensor connector.

    2. A00KZPC

      Disconnect the No. 2 exhaust gas temperature sensor connector.

    3. A00KV1I

      Disconnect the No. 3 exhaust gas temperature sensor connector.

    4. A00KW5B

      Disconnect the No. 6 exhaust pipe air hose from the front exhaust pipe.

    5. A00KT1Y

      Disconnect the No. 7 exhaust pipe air hose from the front exhaust pipe.

    6. A00L0JE

      Remove the 2 exhaust pipe supports.

      Tech Tips

      Remove the exhaust pipe supports before removing the No. 3 frame crossmember.

    7. A00L0V0

      Remove the 3 nuts and front exhaust pipe.

    8. Remove the gasket.

  7. REMOVE SPEED SENSOR NT

    A00XGCQ

    1. Disconnect the sensor connector.

    2. Remove the bolt and sensor.

    3. Remove the O-ring from the sensor.

  8. REMOVE SPEED SENSOR SP2

    A00XDX1

    1. Disconnect the sensor connector.

    2. Remove the bolt and sensor.

    3. Remove the O-ring from the sensor.