OUTER REAR VIEW MIRROR INSPECTION
-
INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Side Monitor System)
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
-
Apply battery voltage and check the operation of the mirror.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 1 (MV)
Battery negative (-) → Terminal 9 (M+)
Turns upward (A) Battery negative (-) → Terminal 1 (MV)
Battery positive (+) → Terminal 9 (M+)
Turns downward (B) Battery positive (+) → Terminal 8 (MH)
Battery negative (-) → Terminal 9 (M+)
Turns left (C) Battery negative (-) → Terminal 8 (MH)
Battery positive (+) → Terminal 9 (M+)
Turns right (D) If the result is not as specified, replace the outer rear view mirror assembly LH.
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
OK Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Forward position (A) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Driving position (C) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Retracted position (E) Does not move Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Retracted position (E) Moves from (E) to driving position (C) Note
-
Disconnect and reconnect the battery between each mirror position check.
-
Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the outer rear view mirror assembly LH.
-
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
w/ Mirror Heater:
Check the mirror heater.
-
Measure the resistance according to the value (s) in the table below.
Standard Resistance Tester Connection Condition Specified Condition Terminal 4 (+) - Terminal 11 (-) 25°C (75°F) 3.0 to 3.9 Ω If the result is not as specified, replace the outer rear view mirror assembly LH.
-
Apply battery voltage and check the operation of the mirror heater.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 4 (+)
Battery negative (-) → Terminal 11 (-)
Mirror becomes warm Tech Tips
It will take a short time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly LH.
-
-
-
INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Side Monitor System)
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
-
Apply battery voltage and check the operation of the mirror.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 1 (MV)
Battery negative (-) → Terminal 9 (M+)
Turns upward (A) Battery negative (-) → Terminal 1 (MV)
Battery positive (+) → Terminal 9 (M+)
Turns downward (B) Battery positive (+) → Terminal 8 (MH)
Battery negative (-) → Terminal 9 (M+)
Turns left (C) Battery negative (-) → Terminal 8 (MH)
Battery positive (+) → Terminal 9 (M+)
Turns right (D) If the result is not as specified, replace the outer rear view mirror assembly RH.
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
OK Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Forward position (A) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Driving position (C) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 10 (MF)
Retracted position (E) Does not move Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 10 (MF)
Retracted position (E) Moves from (E) to driving position (C) Note
-
Disconnect and reconnect the battery between each mirror position check.
-
Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the outer rear view mirror assembly RH.
-
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
w/ Mirror Heater:
Check the mirror heater.
-
Measure the resistance according to the value (s) in the table below.
Standard Resistance Tester Connection Condition Specified Condition Terminal 4 (+) - Terminal 11 (-) 25°C (75°F) 3.0 to 3.9 Ω If the result is not as specified, replace the outer rear view mirror assembly RH.
-
Apply battery voltage and check the operation of the mirror heater.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 4 (+)
Battery negative (-) → Terminal 11 (-)
Mirror becomes warm Tech Tips
It will take a short time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly RH.
-
-
-
INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Side Monitor System)
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
-
Apply battery voltage and check the operation of the mirror.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 6 (MV)
Battery negative (-) → Terminal 5 (M+)
Turns upward (A) Battery negative (-) → Terminal 6 (MV)
Battery positive (+) → Terminal 5 (M+)
Turns downward (B) Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 5 (M+)
Turns left (C) Battery negative (-) → Terminal 4 (MH)
Battery positive (+) → Terminal 5 (M+)
Turns right (D) If the result is not as specified, replace the outer rear view mirror assembly LH.
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
w/ Retract Mirror:
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
OK Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Forward position (A) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Driving position (C) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Retracted position (E) Does not move Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Retracted position (E) Moves from (E) to driving position (C) Note
-
Disconnect and reconnect the battery between each mirror position check.
-
Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the outer rear view mirror assembly LH.
-
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly LH)
w/ Mirror heater:
Check the mirror heater.
-
Measure the resistance according to the value (s) in the table below.
Standard Resistance Tester Connection Condition Specified Condition Terminal 2 (+) - Terminal 8 (-) 25°C (75°F) 3.0 to 3.9 Ω If the result is not as specified, replace the outer rear view mirror assembly LH.
-
Apply battery voltage and check the operation of the mirror heater.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (+)
Battery negative (-) → Terminal 8 (-)
Mirror becomes warm Tech Tips
It will take a short time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly LH.
-
-
-
INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Side Monitor System)
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
-
Apply battery voltage and check the operation of the mirror.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 6 (MV)
Battery negative (-) → Terminal 5 (M+)
Turns upward (A) Battery negative (-) → Terminal 6 (MV)
Battery positive (+) → Terminal 5 (M+)
Turns downward (B) Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 5 (M+)
Turns left (C) Battery negative (-) → Terminal 4 (MH)
Battery positive (+) → Terminal 5 (M+)
Turns right (D) If the result is not as specified, replace the outer rear view mirror assembly RH.
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
w/ Retract Mirror:
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
OK Measurement Condition Mirror Position Specified Condition Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Forward position (A) Moves from (A) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Forward position (A) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Position between forward position (A) and driving position (C) Moves from (B) to forward position (A) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Driving position (C) Moves from (C) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Driving position (C) Does not move Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to retracted position (E) Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Position between driving position (C) and retracted position (E) Moves from (D) to driving position (C) Battery positive (+) → Terminal 3 (MR)
Battery negative (-) → Terminal 9 (MF)
Retracted position (E) Does not move Battery negative (-) → Terminal 3 (MR)
Battery positive (+) → Terminal 9 (MF)
Retracted position (E) Moves from (E) to driving position (C) Note
-
Disconnect and reconnect the battery between each mirror position check.
-
Do not apply battery voltage when moving the mirror by hand into each mirror position.
If the result is not as specified, replace the outer rear view mirror assembly RH.
-
-
Text in Illustration *a Component without harness connected
(Outer Rear View Mirror Assembly RH)
w/ Mirror Heater:
Check the mirror heater.
-
Measure the resistance according to the value (s) in the table below.
Standard Resistance Tester Connection Condition Specified Condition Terminal 2 (+) - Terminal 8 (-) 25°C (75°F) 3.0 to 3.9 Ω If the result is not as specified, replace the outer rear view mirror assembly RH.
-
Apply battery voltage and check the operation of the mirror heater.
OK Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (+)
Battery negative (-) → Terminal 8 (-)
Mirror becomes warm Tech Tips
It will take a short time for the mirror to become warm.
If the result is not as specified, replace the outer rear view mirror assembly RH.
-
-