BACK DOOR DISASSEMBLY


  1. REMOVE SPARE WHEEL COVER PAD (w/ Back Door Tire Carrier)


    1. A00JTU0

      Detach the 7 claws and move the wheel cover pad out of the way.

  2. REMOVE SPARE WHEEL COVER (w/ Back Door Tire Carrier)


    1. A00JVLX

      Remove the bolt.

    2. Move the lever.

    3. A00JXSL

      Detach the 8 claws and remove the spare wheel cover.

  3. REMOVE SPARE TIRE (w/ Back Door Tire Carrier)

  4. REMOVE NO. 2 SPARE WHEEL COVER (w/ Back Door Tire Carrier)


    1. A00JZPU

      Remove the 4 screws and No. 2 spare wheel cover.

  5. REMOVE TELEVISION CAMERA BRACKET (w/ Back Door Tire Carrier)

    A00998U

    1. Disconnect the connector and detach the clamp.

    2. Remove the 2 bolts and television camera bracket with rear television camera.

  6. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Back Door Tire Carrier)

    A0099M7

    1. Disconnect the connector and remove the rear No. 2 window wire.

    2. Remove the bolt and rear television camera.

  7. REMOVE SPARE WHEEL CARRIER BRACKET SUB-ASSEMBLY (w/ Back Door Tire Carrier)


    1. A00JUUF

      Remove the 2 bolts, 2 nuts and spare wheel carrier bracket sub-assembly.

    2. A00JZUK

      Using E10 "TORX" sockets, remove the 2 stud bolts.

      Note

      If a stud bolt is deformed or its threads are damaged, replace it.

  8. REMOVE BACK DOOR CENTER GARNISH


    1. A00JXPP

      Detach the 4 clips and remove the back door center garnish.

  9. REMOVE BACK DOOR SIDE GARNISH LH


    1. A00JW8G

      Detach the 2 clips and claw and remove the back door side garnish.

  10. REMOVE BACK DOOR SIDE GARNISH RH


    1. A00JXPA

      Detach the 2 clips and claw and remove the back door side garnish.

  11. REMOVE BACK DOOR TRIM COVER


    1. A00JZC7

      Remove the back door trim cover as shown in the illustration.

  12. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY


    1. A00JV27

      Remove the upper tool box panel sub-assembly as shown in the illustration.

  13. REMOVE TOOL CASE


    1. A00JTVV

      Detach the 2 claws and remove the tool case.

  14. REMOVE BACK DOOR LOCK COVER (w/o Back Door Tire Carrier)


    1. A00JXCC

      Using moulding remover B, detach the clip and 6 claws and remove the back door lock cover.

  15. REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)


    1. A00K0S7

      Remove the screw.

    2. Detach the 5 claws and remove the back door inside handle bezel.

  16. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A00JWOS

      Detach the claw and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A00JZLH

      Remove the screw.

    3. w/o Back Door Tire Carrier:


      1. A00JX6B

        Remove the bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

    4. w/ Back Door Tire Carrier:


      1. A00JZAO

        Remove the bolt.

      2. Detach the 16 clips and remove the back door trim panel assembly.

    5. for Face to Face Seat Type:


      1. A00K0PU

        Remove the screw and bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

  17. REMOVE BACK DOOR INSIDE HANDLE SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A00JYJA

      Detach the guide.

    2. Detach the claws and remove the inside handle sub-assembly.

    3. Disconnect the 2 cables from the inside handle sub-assembly.

  18. REMOVE TOOL BOX BRACKET


    1. A00JYYW

      Remove the 4 bolts and 2 tool box brackets.

  19. REMOVE BACK DOOR SERVICE HOLE COVER


    1. A00JV03

      Remove the service hole cover.

  20. REMOVE BACK DOOR OUTSIDE HANDLE LH


    1. w/ Back Door Tire Carrier:


      1. A00JVRJE01
        Text in Illustration
        *1 Hole Plug

        Remove the hole plug.

      2. Remove the 2 nuts and back door outside handle.

      3. Disconnect the cable.

    2. w/o Back Door Tire Carrier:


      1. A00JXB7

        Remove the 2 nuts and back door outside handle.

      2. Disconnect the cable.

  21. REMOVE BACK DOOR LOCK ASSEMBLY


    1. Disconnect the connector.

    2. A00979JE01
      Text in Illustration
      *A for Standard Type
      *B w/ Back Door Tire Carrier, for Face to Face Seat Type

      Using a T30 "TORX" wrench, remove the 3 screws.

      Note

      Be careful when removing the bolts as the door lock may fall and become damaged.

    3. A00948H

      Disconnect the cable and remover the back door lock assembly.

    4. Remove the door lock wiring harness seal from the back door lock assembly.

  22. REMOVE BACK DOOR LOCK CONTROL CABLE ASSEMBLY


    1. A00K1Y1

      Disconnect the cable.

  23. REMOVE REAR NO. 1 WINDOW WIRE (w/ Back Door Tire Carrier)


    1. A00K0Q3E01
      Text in Illustration
      *a Outer Side
      *b Inner Side

      Disconnect the connector.

    2. Detach the 2 clamps and remove the rear No. 1 window wire.

  24. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/o Back Door Tire Carrier)

    A009BFQ

    1. Disconnect the connector.

    2. Remove the 2 bolts and rear television camera.

  25. REMOVE NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)


    1. w/o Back Door Tire Carrier:


      1. A00JUB9

        Remove the 2 screws and No. 2 back door garnish retainer.

  26. REMOVE LOWER BACK DOOR OUTSIDE GARNISH MOULDING LH (w/o Back Door Tire Carrier)

    A0095W8E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 5 claws and remove the outside garnish moulding.

      Tech Tips

      Tape the screwdriver tip before use.

  27. REMOVE LOWER BACK DOOR OUTSIDE GARNISH MOULDING RH (w/o Back Door Tire Carrier)


    1. A00JU54

      Detach the 5 claws and remove the moulding.

  28. REMOVE LOWER BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE LH (w/o Back Door Tire Carrier)

    A009888

    1. Disconnect the connector and detach the clamp.

    2. Remove the screw.

    3. Detach the double-sided tape.

    4. Using a screwdriver, detach the 5 claws and remove the outside garnish.

      Note

      Be careful not to damage the vehicle body.

      A00999XE01
      Text in Illustration
      *1 Protective Tape *2 Double-sided Tape

  29. REMOVE LOWER BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE RH (w/o Back Door Tire Carrier)


    1. Remove the screw.

      A00JYU6E01
      Text in Illustration
      *1 Double-Sided Tape - -

    2. Detach the 4 claws and remove the lower door garnish sub-assembly outside.

  30. REMOVE GLASS HATCH OPENER SWITCH ASSEMBLY (w/o Back Door Tire Carrier)

    A009ACT

    1. Remove the screw and opener switch.

  31. REMOVE SWITCH COVER (w/o Back Door Tire Carrier)

    A0096N9

    1. Remove the switch cover.

  32. REMOVE NO. 2 BACK DOOR WEATHERSTRIP (w/o Back Door Tire Carrier)


    1. A00JWEO

      Remove the No. 2 back door weatherstrip.

  33. REMOVE BACK DOOR SIDE FEMALE STOPPER SUB-ASSEMBLY LH


    1. A00K07J

      Remove the 2 bolts and back door side female stopper sub-assembly.

  34. REMOVE BACK DOOR NO. 2 STOPPER CUSHION


    1. A00K09N

      Remove the back door No. 2 stopper cushion.

  35. REMOVE BACK DOOR NO. 1 STOPPER


    1. A00K150

      Using a clip remover, detach the 2 claws and remove the back door No. 1 stopper.

  36. REMOVE BACK DOOR PANEL CUSHION (w/o Back Door Tire Carrier)


    1. A00JY9D

      Remove the 4 back door panel cushions.

  37. REMOVE BACK WINDOW LOCK ASSEMBLY (w/o Back Door Tire Carrier)

    A009C0J

    1. Disconnect the connector.

    2. Remove the 3 bolts and back window lock assembly.

  38. REMOVE REAR NO. 1 SPOILER COVER (w/o Back Door Tire Carrier)

    A0099TWE01
    Text in Illustration
    *1 Fastening Tape

    1. Detach the fastening tape and 5 clips and remove the rear No. 1 spoiler cover.

  39. REMOVE REAR SPOILER COVER RH

    A0099TWE01
    Text in Illustration
    *1 Fastening Tape

    1. Detach the fastening tape and 5 clips and remove the rear No. 1 spoiler cover.

  40. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. w/o Back Door Tire Carrier:

      Remove the rear spoiler sub-assembly Click here.

    2. w/ Back Door Tire Carrier:

      Remove the rear spoiler sub-assembly Click here.

  41. REMOVE NO. 2 BACK DOOR STIFFENER (w/ Back Door Tire Carrier)

    A009AU8E01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure to remove the No. 2 back door stiffener on the other side.


    1. Put protective tape around the No. 2 back door stiffener.

    2. Using a clip remover, detach the 2 claws and remove the No. 2 back door stiffener.

      Tech Tips

      Tape the clip remover tip before use.

  42. REMOVE REAR WASHER NOZZLE SUB-ASSEMBLY


    1. A0095J4

      Disconnect the hose.

    2. A009475

      Detach the 2 claws and remove the washer nozzle.

  43. REMOVE REAR WIPER ARM


    1. A00996T

      Remove the nut and rear wiper arm.

  44. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A009835E01
      Text in Illustration
      *A w/ Back Door Tire Carrier
      *B w/o Back Door Tire Carrier

      Disconnect the washer hose and wiper motor connector.

    2. A0095XSE01
      Text in Illustration
      *A w/ Back Door Tire Carrier
      *B w/o Back Door Tire Carrier

      Remove the 3 bolts.

    3. Detach the 2 guides and remove the rear wiper motor.

  45. REMOVE NO. 1 BACK WINDOW WIPER MOTOR BRACKET (w/ Back Door Tire Carrier)


    1. A00JZH9

      Using a clip remover, detach the clamp.

    2. Remove the 3 bolts.

    3. Using a clip remover, detach the 2 clips and remove the No. 1 back window wiper motor bracket.

  46. REMOVE BACK DOOR LOCK STRIKER COVER (w/o Back Door Tire Carrier)

  47. REMOVE BACK WINDOW STAY ASSEMBLY LH (w/o Back Door Tire Carrier)


    1. A0095THE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the back window stay.

      CAUTION:

      Remove the back window stay while supporting the back door with one hand.

      Tech Tips

      Tape the screwdriver tip before use.

  48. REMOVE BACK WINDOW STAY ASSEMBLY RH (w/o Back Door Tire Carrier)

    Tech Tips

    Use the same procedure described for the LH side.

  49. REMOVE BACK DOOR STAY BOLT (w/o Back Door Tire Carrier)


    1. A00JUVQE01
      Text in Illustration
      *A for RH Side
      *B for LH Side

      Remove the 2 back door stay bolts.

  50. REMOVE BACK DOOR GLASS (w/o Back Door Tire Carrier)


    1. A0095GK

      Remove the connector and detach the 2 clamps.

    2. A0097N7

      Remove the 4 bolts and back window glass.

  51. REMOVE BACK DOOR CUSHION (w/ Back Door Tire Carrier)


    1. A00K0EY

      Remove the 3 back door cushions.

  52. REMOVE REAR BUMPER BAR PLATE


    1. Put protective tape around the rear bumper bar plate.

    2. Detach the 14 claws and remove the rear bumper bar plate.

      A00XI05E01
      Text in Illustration
      *1 Protective Tape - -

  53. REMOVE BACK DOOR CHECK

    Note


    • If the back door check is detached from a ball joint, do not reuse it as the connection with the ball joint will be loose, resulting in the back door check falling off.

    • If the back door check is detached from a ball joint, it becomes non-reusable. Therefore, do not detach the back door check from a ball joint unless replacing it.


    1. A00JV6C

      Remove the 2 bolts

    2. Using a clip remover, detach the clip and remove the back door check with back door lower damper stay bracket.

    3. A00JVY6

      Detach the wire harness clamp.

    4. Remove the 3 bolts and back door check with back door lower damper stay bracket.

  54. REMOVE BACK DOOR LOWER DAMPER STAY BRACKET LH

    Note


    • If the back door check is detached from a ball joint, do not reuse it as the connection with the ball joint will be loose, resulting in the back door check falling off.

    • If the back door check is detached from a ball joint, it becomes non-reusable. Therefore, do not detach the back door check from a ball joint unless replacing it.


    1. Back door side:


      1. A00K0HLE01

        Using a screwdriver, remove the stop ring as shown in the illustration, and then remove the back door check.

        Note

        Tape the screwdriver tip before use.

      2. Using a clip remover, detach the clip and remove the back door damper stay bracket.

    2. Bumper side:


      1. A00JZ04E01

        Using a screwdriver, remove the stop ring as shown in the illustration, and then remove the back door check.

        Note

        Tape the screwdriver tip before use.

  55. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. w/o Back Door Tire Carrier:

      Remove the back door outside garnish Click here.

    2. w/ Back Door Tire Carrier:

      Remove the back door outside garnish Click here.

  56. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)


    1. w/o Back Door Tire Carrier:

      Remove the license plate light cord Click here.

    2. w/ Back Door Tire Carrier:

      Remove the license plate light cord Click here.

  57. REMOVE NO. 1 BACK DOOR GARNISH RETAINER (w/o Back Door Tire Carrier)

    A00965S

    1. Remove the 3 screws and No. 1 back door garnish retainer.

  58. REMOVE REAR LICENSE LIGHT COVER (w/ Back Door Tire Carrier)

    A0097ON

    1. Remove the 5 screws and rear license light cover.

  59. REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/o Back Door Tire Carrier)


    1. A0099D4

      Detach the clamp.

    2. A009BE4

      Remove the 2 screws.

    3. Detach the 2 guides and remove the back door electrical key switch.

  60. REMOVE BACK DOOR ELECTRICAL KEY SWITCH (w/ Back Door Tire Carrier)


    1. A0098ZT

      Remove the 2 screws.

    2. Detach the 2 guides and remove the back door electrical key switch.

  61. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. w/o Back Door Tire Carrier:

      Remove the license plate light Click here.

    2. w/ Back Door Tire Carrier:

      Remove the license plate light Click here.