HOOD ON-VEHICLE INSPECTION


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A through G are within each standard range.

      A009BPAE01
      Standard
      Area Measurement Area Measurement
      A 6.85 to 9.85 mm (0.270 to 0.388 in.) B 0.4 mm (0.0157 in.)
      C 3.55 to 6.55 mm (0.140 to 0.258 in.) D 2.0 to 5.0 mm (0.0787 to 0.197 in.)
      E -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) F 2.0 to 5.0 mm (0.0787 to 0.197 in.)
      G -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) - -