FRONT PASSENGER SIDE POWER WINDOW SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH


    1. A00K0GV

      Detach the 2 clips and remove the front door lower frame bracket garnish LH.

  2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL RH


    1. A00JYBN

      Using a moulding remover, detach the 3 claws and remove the inside handle bezel as shown in the illustration.

  3. REMOVE ASSIST GRIP COVER RH


    1. A00JY4L

      Using moulding remover A, detach the 8 claws and remove the assist grip cover.

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    1. A00JZZF

      Remove the 3 screws.

    2. Remove the 12 clips.

    3. A00K22RE01
      Text in Illustration
      *1 Reference Boss

      Pull out the front door trim board sub-assembly in the direction indicated by the arrow in the illustration.

    4. Raise the front door trim board sub-assembly to detach the 4 claws and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip LH.

    5. A00JZ5R

      Disconnect the 2 connectors.

    6. w/ Seat Position Memory System:


      1. A00JUOF

        Disconnect the connectors.

    7. A00JXET

      Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

  5. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP RH


    1. A00JWX7

      Using a screwdriver, detach the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.

  6. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

    A00JYES

    1. Detach the 2 claws and remove the power window regulator switch assembly.