BACK DOOR GLASS (for Glass Hatch Type) INSTALLATION

INSTALL BACK DOOR HINGE ASSEMBLY LH

1. Using a T30 "TORX" socket wrench, install the back door hinge with the 2 screws.

   Torque:

   8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

INSTALL BACK DOOR HINGE ASSEMBLY RH

INSTALL BACK WINDOW GLASS SPACER

Tech Tips

Perform the following procedures if replacing any back window glass spacer.

Text in Illustration

*1

No. 2 Back Window Glass Spacer

*2

No. 1 Back Window Glass Spacer

1. Apply Primer G to the window where the spacer will be installed.

   Standard
   Area Specified Condition a 88.2 mm (3.47 in.) b 100.7 mm (3.94 in.) c 73.7 mm (2.90 in.) d 35.0 mm (1.37 in.)

2. Note

   
   

   • Allow the primer to dry for 3 minutes or more.

   • Throw away any leftover primer.

   • Do not apply too much primer.

   Tech Tips

   If the primer is applied to an area that is not specified, apply non-residue solvent to a clean cloth and wipe off the excess primer before it dries.

3. Remove the peeling paper from a new spacer install the spacer to the back door glass at the location shown in the illustration.

INSTALL BACK WINDOW LOCK STRIKER ASSEMBLY

1. Install the lock striker with the 2 nuts.

INSTALL BACK DOOR LOCK STRIKER COVER

1. Attach the 3 claws to install the lock striker cover.

INSTALL BACK DOOR GLASS

1. Install the back door glass with the 4 bolts.

   Torque:

   20 N*m  { 204 kgf*cm, 15 ft.*lbf }

2. Attach the 2 clamps and install the connector.

INSTALL BACK WINDOW STAY ASSEMBLY RH

INSTALL REAR WIPER MOTOR ASSEMBLY

INSTALL REAR WIPER ARM