BACK DOOR GLASS (for Glass Hatch Type) REMOVAL


  1. REMOVE REAR NO. 1 SPOILER COVER

    A0099TWE01
    Text in Illustration
    *1 Fastening Tape

    1. Detach the fastening tape and 5 clips and remove the rear No. 1 spoiler cover.

  2. REMOVE REAR SPOILER COVER RH

    A0099TWE01
    Text in Illustration
    *1 Fastening Tape

    1. Detach the fastening tape and 5 clips and remove the rear No. 1 spoiler cover.

  3. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. A0096V1

      Disconnect the connector.

    2. A00940S

      Remove the 6 bolts.

    3. A0097NQ

      Detach the 3 clips and rear spoiler.

  4. REMOVE REAR WIPER ARM


    1. A00996T

      Remove the nut and rear wiper arm.

  5. REMOVE REAR WIPER MOTOR ASSEMBLY


    1. A009835E01
      Text in Illustration
      *A w/ Back Door Tire Carrier
      *B w/o Back Door Tire Carrier

      Disconnect the washer hose and wiper motor connector.

    2. A0095XSE01
      Text in Illustration
      *A w/ Back Door Tire Carrier
      *B w/o Back Door Tire Carrier

      Remove the 3 bolts.

    3. Detach the 2 guides and remove the rear wiper motor.

  6. REMOVE BACK WINDOW STAY ASSEMBLY LH


    1. A0095THE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 stop rings as shown in the illustration, and then remove the back window stay.

      CAUTION:

      Remove the back window stay while supporting the back door with one hand.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE BACK WINDOW STAY ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  8. REMOVE BACK DOOR GLASS


    1. A0095GK

      Remove the connector and detach the 2 clamps.

    2. A0097N7

      Remove the 4 bolts and back window glass.

  9. REMOVE BACK DOOR LOCK STRIKER COVER

    A0098IC

    1. Using a moulding remover, detach the 3 claws and remove the lock striker cover.

  10. REMOVE BACK WINDOW LOCK STRIKER ASSEMBLY

    A0094HAE01

    1. Remove the 2 nuts and lock striker.

  11. REMOVE BACK WINDOW GLASS SPACER

    A0094YIE01
    Text in Illustration
    *1 No. 2 Back Window Glass Spacer
    *2 No. 1 Back Window Glass Spacer

    Tech Tips

    Perform the following procedures if replacing the back window glass spacer.


    1. Remove the back window glass spacer.

  12. REMOVE BACK DOOR HINGE ASSEMBLY LH

    A00979YE01

    Tech Tips

    Perform the following procedures if replacing any back door hinge assembly LH.


    1. Using a T30 "TORX" wrench, remove the 2 screws and back door hinge.

  13. REMOVE BACK DOOR HINGE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.