FRONT CONSOLE BOX (for Manual Transmission) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    A00940P

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A00OBDVE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A00O9Z2

    1. Detach the 4 clips and remove the instrument panel finish panel end.

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A00OAX0

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel finish panel end.

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

    A00O85FE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front console upper panel garnish.

    2. Detach the 5 clips.

    3. Disconnect each connector and remove the front console upper panel garnish.

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A00O81Y

    1. for LHD:


      1. Remove the screw.

      2. Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.

    2. A00O9QL

      for RHD:


      1. Remove the screw.

      2. Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.

  8. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    A00O7DD

    1. Detach the 2 clips and guide and remove the front No. 1 console box insert.

  9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Remove the screw.

    2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.

      A00OAYQE01
      Text in Illustration
      *A for LHD *B for RHD

  10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    A00O7O9

    1. Detach the 2 clips and guide and remove the front No. 2 console box insert.

  11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A00983D

    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  12. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    A009AEUE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  13. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

    A00OAGO

    1. Detach the 4 claws.

    2. Disconnect the 2 clamps and remove the No. 1 heater to register duct.

  14. REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

    A00O6CE

    1. Remove the clip and No. 1 console box duct.

  15. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A00O5RN

    1. Detach the 4 clips and 4 claws.

    2. Disconnect each connector and remove the rear console end panel.

  16. REMOVE REAR CONSOLE BOX ASSEMBLY

    A0093W8

    1. Remove the 2 screws, clip and 5 bolts.

    2. Disconnect each connector and remove the rear console box.