FRONT CONSOLE BOX (for Automatic Transmission) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    A00940P

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A00OBDVE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A00O9Z2

    1. Detach the 4 clips and remove the instrument panel finish panel end.

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A00OAX0

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel finish panel end.

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

    A00O85FE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front console upper panel garnish.

    2. Detach the 5 clips.

    3. Disconnect each connector and remove the front console upper panel garnish.

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A00O81Y

    1. for LHD:


      1. Remove the screw.

      2. Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.

    2. A00O9QL

      for RHD:


      1. Remove the screw.

      2. Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.

  8. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    A00O7DD

    1. Detach the 2 clips and guide and remove the front No. 1 console box insert.

  9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Remove the screw.

    2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.

      A00OAYQE01
      Text in Illustration
      *A for LHD *B for RHD

  10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    A00O7O9

    1. Detach the 2 clips and guide and remove the front No. 2 console box insert.

  11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A00O75AE01
    Text in Illustration
    *1 Shifting Hole Cover

    1. Move the shifting hole cover downward.

    2. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  12. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    A00O6GME01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  13. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

    A00OAGO

    1. Detach the 4 claws.

    2. Disconnect the 2 clamps and remove the No. 1 heater to register duct.

  14. REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

    A00O6CE

    1. Remove the clip and No. 1 console box duct.

  15. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A00O5RN

    1. Detach the 4 clips and 4 claws.

    2. Disconnect each connector and remove the rear console end panel.

  16. REMOVE REAR CONSOLE BOX ASSEMBLY

    A00OALF

    1. Remove the 2 screws, clip and 5 bolts.

    2. Disconnect each connector and remove the rear console box.