INSTRUMENT PANEL SAFETY PAD REASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL ENGINE SWITCH (w/ Entry and Start System)


    1. Attach the 2 claws to install the engine switch.

    2. Connect the connector.

  2. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    1. A0095SCE01
      Text in Illustration
      *a Hook A
      *b Hook B

      Attach the 5 hooks (A).

    2. Attach the 5 hooks (B) to install the instrument panel passenger airbag.

    3. Install the 2 screws.

  3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

    A0099BZ

    1. Attach the 2 claws to install the sensor.

  4. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    1. A009B28

      Install the antenna with the 2 screws.

    2. Attach the 2 clamps.

  5. INSTALL NO. 2 INSTRUMENT PANEL WIRE


    1. for LHD:


      1. Attach the 20 clamps to install the No. 2 instrument panel wire.

      2. Connect the 2 connectors.

    2. for RHD:


      1. Attach the 20 clamps to install the No. 2 instrument panel wire.

      2. Connect the 2 connectors.

  6. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH


    1. Install the No. 1 defroster nozzle garnish with the 6 screws <A>.

  7. INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. Install the No. 3 heater to register duct with the 2 screws <A>.

  8. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Install the defroster nozzle with the 4 screws <A>.

  9. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the 2 claws to install the No. 1 side defroster nozzle duct.

    2. Install the screw <A>.

  10. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Tech Tips

    Use the same procedure described for the No. 1 side defroster nozzle duct.

  11. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. Install the No. 1 heater to register duct with the 4 screws <A>.

  12. INSTALL NO. 2 HEATER TO REGISTER DUCT

    Tech Tips

    Use the same procedure described for the No. 1 heater to register duct.