REAR EVAPORATOR TEMPERATURE SENSOR DISASSEMBLY


  1. REMOVE REAR SIDE NO. 4 AIR DUCT (w/ Rear Air Duct)


    1. A0096K3

      Remove the 3 screws and duct.

  2. REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY


    1. A009B4D

      Disconnect the connector.

    2. Remove the 2 screws and damper servo.

  3. REMOVE COOLER BRACKET


    1. A009BXF

      Remove the 4 screws and bracket.

  4. REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY


    1. A009A5M

      Disconnect the connector.

    2. Remove the 2 screws and damper servo.

      Note

      After removing the damper servo, do not move the gear of the servo unit.

  5. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


    1. A0096UZ

      Remove the packing.

    2. A009BPX

      Detach the 3 claws and remove the cover.

    3. Remove the bolt and 2 screws.

    4. Using pliers, grip the claws of the clips and slide the 2 clips.

    5. Detach the clamp.

    6. Disconnect the drain hose.

    7. Remove the air conditioning tube and accessory assembly.

    8. Remove the 2 O-rings from the air conditioning tube and accessory assembly.

  6. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


    1. A0095X9

      Remove the screw.

    2. Detach the claw and open the heater clamp.

    3. A0098UC

      Remove the heater radiator.

    4. A009867

      Detach the 2 claws and remove the heater clamp.

  7. REMOVE HEATER BRACKET


    1. A009C4H

      Remove the 3 screws and bracket.

  8. REMOVE REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    1. A009BZE

      Remove the 3 screws and rear blower with fan motor.

  9. REMOVE BLOWER MOTOR CONTROLLER


    1. A0098L3

      Remove the 2 screws and blower motor controller.

  10. REMOVE REAR COOLING UNIT EXPANSION VALVE


    1. A0095OC

      Detach the 2 clamps.

    2. A0093ZC

      Detach the 3 clamps and disconnect the air conditioning wiring harness from the rear cooling unit case.

    3. A0099O6

      Remove the 12 screws and rear cooling unit case LH.

    4. A0097CL

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    5. A00995X

      Remove the expansion valve.

  11. REMOVE REAR EVAPORATOR SUB-ASSEMBLY


    1. A0094KZ

      Remove the evaporator from the rear cooling unit case RH.

    2. A0095YU

      Remove the 2 O-rings from the evaporator.

  12. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR


    1. A0097BK

      Move the tip of the sensor in the direction indicated by the arrow in the illustration to remove it from the bracket plate.

    2. Detach the 2 claws and remove the sensor.