HEADLIGHT CLEANER SWITCH INSTALLATION

Tech Tips


  • A bolt without a torque specification is shown in the standard bolt chart Click here.

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL ROOM LIGHT SWITCH ASSEMBLY (for LHD)


    1. Attach the 2 claws to install the switch.

  2. INSTALL ROOM LIGHT SWITCH ASSEMBLY (for RHD)


    1. Attach the 2 claws to install the switch.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector and each cable.

    2. w/o Knee Airbag:


      1. Attach the 7 clips to install the lower instrument panel finish panel.

    3. w/ Knee Airbag:


      1. Attach the 14 clips to install the lower instrument panel finish panel.

    4. Install the 2 bolts <C>.

    5. Attach the 2 claws to close the cover.

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)


    1. Connect each connector.

    2. Attach the 4 clips to install the instrument panel finish panel.

  5. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)


    1. Connect each connector.

    2. Attach the 4 clips to install the instrument panel finish plate garnish.

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)


    1. Attach the 3 clips to install the instrument cluster finish panel ornament.

  7. INSTALL INSTRUMENT SIDE PANEL LH


    1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. for LHD:


      1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

    2. for RHD:


      1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

  9. INSTALL COWL SIDE TRIM BOARD LH


    1. Attach the clip and claw to install the cowl side trim board.

    2. Install the clip.

  10. INSTALL DOOR SCUFF PLATE ASSEMBLY LH


    1. Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.