WASHER NOZZLE (for Rear Side) ON-VEHICLE INSPECTION


  1. INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/ Back Door Tire Carrier)


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A0098E1E01
      Standard
      Area Specified Condition Area Specified Condition
      A 30.5 mm (1.20 in.) B 28.3 mm (1.11 in.)
      C 50.9 mm (2.00 in.) D 455.5 mm (17.9 in.)
      E 500.1 mm (19.7 in.) F 146.1 mm (5.75 in.)
      G 84.6 mm (3.33 in.) H 420.5 mm (16.6 in.)
      I 496.4 mm (19.5 in.) J 35.9 mm (1.41 in.)

      Tech Tips

      If the result is not as specified, replace the rear washer nozzle.

  2. INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY (w/o Back Door Tire Carrier)


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A0095Q9E01
      Standard
      Area Specified Condition Area Specified Condition
      A 42.7 mm (1.68 in.) B 21.5 mm (0.847 in.)
      C 65.5 mm (2.58 in.) D 426.6 mm (16.8 in.)
      E 505.5 mm (19.9 in.) F 140.5 mm (5.53 in.)
      G 3.6 mm (0.142 in.) H 412.8 mm (16.3 in.)
      I 494.9 mm (19.5 in.) J 50.4 mm (1.98 in.)

      Tech Tips

      If the result is not as specified, replace the malfunctioning rear washer nozzle.